Welcome to the Mira Advance ATL Thermostatic User Guide. This guide provides essential information for installing, operating, and maintaining your shower system safely and efficiently. Ensure optimal performance by following the instructions carefully.
Overview of the Mira Advance ATL Thermostatic Shower
The Mira Advance ATL Thermostatic Shower is a sophisticated, energy-efficient system designed for optimal comfort and safety. It features advanced thermostatic technology to maintain consistent water temperature, preventing scalding and ensuring a luxurious showering experience. The shower is equipped with a user-friendly control panel, allowing easy adjustment of temperature and flow rate. Its sleek, modern design complements any bathroom, while its eco-friendly features help reduce water and energy consumption. The system includes a thermostatic mixer, shower head, hose, and optional waste water heat recovery for enhanced efficiency. Designed for mains-fed cold water systems, it is ideal for homeowners seeking a high-performance, reliable shower solution.
Importance of Reading the User Guide
Reading the Mira Advance ATL Thermostatic User Guide is essential for safe and efficient use of your shower system. It provides critical information on installation, operation, and maintenance to ensure optimal performance and longevity. The guide outlines safety precautions to prevent scalding and electrical hazards, while also explaining how to adjust settings for personalized comfort. Proper installation, as detailed in the guide, is vital to avoid system damage and ensure compliance with safety standards. By following the instructions, you can maximize energy efficiency and enjoy a luxurious showering experience. Always refer to the guide before use, especially for troubleshooting common issues or performing routine maintenance. This ensures your shower operates safely and effectively for years to come.
Key Features of the Mira Advance ATL Thermostatic Shower
The Mira Advance ATL Thermostatic Shower boasts cutting-edge features designed for comfort, safety, and efficiency. It includes a thermostatic temperature control, ensuring consistent water temperature and preventing scalding. The shower features an adjustable temperature limit, allowing users to set a maximum temperature for added safety, especially for children. The system is compatible with mains-fed cold water only, ensuring reliable performance. Additionally, it incorporates a waste water heat recovery system (WWHRS), which recovers heat from wastewater to pre-heat incoming cold water, enhancing energy efficiency. The sleek control panel offers intuitive operation, while the durable design ensures long-lasting performance. These features combine to provide a luxurious, safe, and eco-friendly showering experience, making the Mira Advance ATL a premium choice for modern bathrooms.
Installation Requirements and Preparation
Ensure the electrical supply is turned off at the mains before starting installation. Determine the shower unit position carefully for proper fitting and accessibility during use.
Pre-Installation Checks
Before installing the Mira Advance ATL Thermostatic Shower, ensure all components are included and undamaged. Verify the electrical supply matches the unit’s requirements, typically 230V AC. Check the water pressure, which should be between 1 and 5 bar. Ensure the shower is connected to a mains-fed cold water supply only. Inspect the plumbing system for any existing issues or leaks. Make sure the waste water heat recovery system (WWHRS) is compatible and installed correctly. Always refer to the WWHRS instructions for specific guidelines. Ensure the area is clear and accessible for installation. Turn off the electrical supply at the mains before starting any work. Follow all safety precautions to avoid accidents or damage to the system. Proper preparation ensures a smooth and safe installation process.
Tools and Materials Needed
To install the Mira Advance ATL Thermostatic Shower, gather essential tools and materials; You will need adjustable wrenches, screwdrivers, pliers, and a spirit level for precise alignment. Ensure you have PTFE tape for sealing pipe connections and a drain key for waste system adjustments. Additional materials include copper or push-fit pipes, isolating valves, and compatible fittings. Safety gear like gloves and goggles is recommended. Refer to the manufacturer’s guidelines for specific requirements. Ensure all items are readily available to streamline the installation process and avoid delays. Proper preparation ensures a safe and efficient setup of your Mira Advance ATL Thermostatic Shower system.
Positioning the Shower Unit
Proper positioning of the Mira Advance ATL Thermostatic Shower is crucial for optimal performance and safety. Ensure the unit is installed in a location with adequate space for maintenance and accessibility. The shower head and control panel should be positioned at a comfortable height, typically between 1.2 to 1.5 meters from the floor, to suit various user preferences. Align the shower unit to ensure even water distribution and prevent water splashing outside the shower area. Consider the location of plumbing and electrical connections to minimize installation complexity. Always follow the manufacturer’s guidelines for unit placement to ensure compliance with safety standards and achieve the best user experience.
Electrical Supply Considerations
Before installing the Mira Advance ATL Thermostatic Shower, ensure the electrical supply is turned off at the mains. The unit requires a compatible electrical connection, typically a 230V supply, and must be installed by a qualified electrician. Avoid connecting multiple showers to a single Waste Water Heat Recovery System (WWHRS) to maintain efficiency. Refer to the WWHRS instructions for specific guidelines. Always follow the manufacturer’s recommendations for electrical connections to ensure safe and reliable operation. This step is critical for both performance and user safety.
Ensure the electrical supply meets the shower’s specifications to prevent damage or malfunction. Adhere to all warnings and guidelines provided in this guide for proper installation and operation.
Plumbing Requirements
Proper plumbing is essential for the safe and efficient operation of the Mira Advance ATL Thermostatic Shower. Ensure the system is connected to a mains-fed cold water supply only, as specified in the guide. Before installation, flush the plumbing system to remove any debris or contaminants. The shower must be installed by a qualified professional to meet local plumbing standards and regulations. Correct inlet connections are critical to prevent leaks and ensure proper water flow. Refer to the manufacturer’s instructions for specific plumbing requirements and recommendations. Adhere to all guidelines to avoid damage to the system and ensure optimal performance.
Failure to follow plumbing guidelines may result in poor performance or safety hazards. Always test the system after installation to ensure everything functions correctly.
Step-by-Step Installation Process
This section provides a comprehensive guide to installing the Mira Advance ATL Thermostatic Shower. Follow the detailed steps to ensure safe and correct installation.
Start by turning off the electrical supply and preparing the installation area. Determine the shower unit’s position, ensuring proper alignment and accessibility. Connect the thermostatic mixer, shower head, and hose according to manufacturer instructions. Mount the control panel securely, and link it to the mixer. Install the Waste Water Heat Recovery System (WWHRS) if applicable, adhering to its specific guidelines. Complete all electrical connections carefully, double-checking wires and circuits. Finally, test the system thoroughly to ensure proper function and safety before regular use.
Refer to the following subsections for detailed instructions on each installation step and post-installation testing procedures.
Connecting the Thermostatic Mixer
Connecting the thermostatic mixer is a critical step in the installation process. Ensure the electrical supply is turned off at the mains before starting. Locate the mixer unit and identify the hot and cold water inlets. Connect the appropriate hoses to the inlets, ensuring they are securely fastened to prevent leaks. Refer to the manufacturer’s instructions for specific fitting types and torque requirements. Once connected, carefully mount the mixer to the wall, ensuring it is level and stable. Double-check all connections for tightness and test the system by turning on the water supply gradually. If any leaks are detected, tighten the connections and test again. Proper installation ensures safe and efficient operation of the shower system.
Installing the Shower Head and Hose
Installing the shower head and hose requires careful attention to ensure proper function and longevity. Begin by attaching the shower hose to the mixer outlet, ensuring a watertight connection. Secure the hose to the shower unit using the provided fittings or brackets. Next, screw the shower head onto the hose end, making sure it is tightly fastened. For optimal performance, check that the shower head is aligned correctly and free from obstructions. Test the system by running water through the shower to identify any leaks or issues. Regular cleaning of the shower head is recommended to maintain water flow and prevent mineral buildup. Proper installation ensures a smooth and enjoyable showering experience.
Mounting the Control Panel
Mounting the control panel is a crucial step in the installation process. Ensure the electrical supply is turned off at the mains before starting. Determine the optimal position for the control panel, typically near the shower head for easy access. Use the provided screws or mounting brackets to secure the panel firmly to the wall. Align the panel to ensure it is level and evenly positioned. Once mounted, connect the electrical wires according to the wiring diagram provided in the guide. Double-check all connections to avoid any electrical issues. After installation, test the control panel to ensure all buttons and features are functioning correctly. Proper mounting ensures safe and intuitive operation of the shower system. Always follow safety guidelines when handling electrical components.
Connecting the Waste Water Heat Recovery System (WWHRS)
Connecting the Waste Water Heat Recovery System (WWHRS) is essential for optimizing energy efficiency. Ensure the electrical supply is turned off at the mains before starting. Locate the WWHRS inlet and outlet ports, ensuring they align with the shower system. Connect the wastewater pipes securely to the designated ports, following the manufacturer’s instructions. Avoid over-tightening to prevent damage. Once connected, refer to the WWHRS manual for specific setup guidelines. Ensure only one shower and one waste supply are connected to the WWHRS. After installation, test the system to confirm proper function. Proper connection ensures efficient heat recovery and optimal performance. Always follow safety guidelines when handling wastewater systems.
Final Electrical Connections
Before making final electrical connections, ensure the power supply is turned off at the mains. Connect the control panel and thermostatic mixer according to the wiring diagram provided. Secure all connections tightly to avoid loose wires. Ensure the system is grounded properly for safety. Once connected, turn the power back on and test the system to confirm proper function. Refer to the WWHRS instructions for any additional electrical requirements; Always follow safety guidelines when working with electrical systems. After completing the connections, double-check all wires and ensure they are safely routed. Proper electrical connections are critical for the safe and efficient operation of the Mira Advance ATL Thermostatic Shower. Store this guide for future reference.
Testing the System
After completing the installation, thoroughly test the Mira Advance ATL Thermostatic Shower to ensure all components function correctly. Start by turning on the water supply and checking for leaks at all connections. Activate the shower and adjust the temperature to verify proper thermostatic control. Test the flow rate by adjusting the control panel settings. Ensure the waste water heat recovery system (WWHRS) operates as intended. Check the electrical connections to confirm they are secure and functioning safely. Run the shower for several minutes to observe consistent performance. If any issues arise, refer to the troubleshooting section. Proper testing ensures a safe and enjoyable user experience. Always follow safety guidelines during testing to avoid any potential risks.
Operating the Mira Advance ATL Thermostatic Shower
Operate your Mira Advance ATL Thermostatic Shower by adjusting temperature and flow rate via the control panel. Use thermostatic features for consistent water temperature. Always check water temperature before use for safety.
Understanding the Control Panel
The control panel is the central interface for operating your Mira Advance ATL Thermostatic Shower. It features intuitive controls for adjusting temperature and flow rate. The panel includes buttons or dials to set your preferred water temperature and regulate water flow. A digital or analog display may show the current temperature, ensuring precise control. The control panel also houses safety features, such as temperature limiters, to prevent scalding. Familiarize yourself with the panel’s layout to optimize your showering experience. Always refer to the user guide for detailed instructions on using the control panel effectively. Proper use ensures consistent water temperature and safe operation.
Setting the Temperature
To set the temperature on your Mira Advance ATL Thermostatic Shower, use the control panel to adjust the desired water temperature. The thermostat allows precise temperature control, ensuring consistent water heat. Use the temperature adjustment dial or button to select your preferred setting. The system will maintain the chosen temperature throughout your shower. Always check the water temperature before entering to avoid discomfort or risk of scalding. The thermostatic mixer is designed to prevent sudden temperature fluctuations, providing a safe and enjoyable showering experience. Refer to the control panel instructions for specific guidance on temperature adjustment. Proper temperature setting ensures comfort and safety for all users.
Adjusting the Flow Rate
To adjust the flow rate on your Mira Advance ATL Thermostatic Shower, use the flow control lever or button on the control panel. This feature allows you to customize water flow to suit your preference. The thermostatic mixer ensures that the temperature remains stable even when adjusting the flow rate. For optimal performance, ensure the flow rate is set appropriately for your water pressure. If the water pressure is low, reducing the flow rate can improve showering experience. Always maintain the shower head and hose to prevent blockages that may affect flow rate. Regular cleaning of the shower head can help maintain consistent water flow. Adjusting the flow rate correctly ensures efficient water usage while maintaining comfort and safety during use.
Using the Thermostatic Features
The thermostatic features of the Mira Advance ATL shower ensure precise temperature control, providing a safe and comfortable showering experience. The temperature can be set within a range to suit individual preferences. The thermostatic mixer maintains the selected temperature consistently, even when water pressure fluctuates. This feature is particularly useful for preventing sudden changes in water temperature, which can be uncomfortable or even dangerous. To use the thermostatic features effectively, set the desired temperature before starting the shower and allow the system to stabilize. The mixer will automatically adjust to maintain the set temperature throughout your shower. This ensures a stable and enjoyable experience, while also enhancing safety, especially for vulnerable users such as children or the elderly.
Maintenance and Upkeep
Regular maintenance is crucial to ensure the Mira Advance ATL Thermostatic Shower operates efficiently and safely. Clean the shower head and mixer regularly to prevent limescale buildup. Check and replace filters as needed to maintain water flow and temperature control. Inspect the system for leaks and address them promptly to prevent damage. Draining the system for maintenance ensures optimal performance and longevity. Follow the manufacturer’s guidelines for all upkeep tasks to keep your shower in excellent condition and extend its lifespan. Proper care will ensure consistent reliability and a superior showering experience for years to come. Always refer to the user guide for detailed instructions.
Cleaning the Shower Head and Mixer
Cleaning the shower head and mixer regularly is essential to maintain optimal water flow and temperature control. Start by removing the shower head and soaking it in a mixture of white vinegar and water for several hours to dissolve mineral buildup. Use a soft cloth to wipe down the mixer, paying attention to any visible limescale deposits. For tougher stains, apply a gentle bathroom cleaner and rinse thoroughly. Ensure all parts are dry after cleaning to prevent water spots. Regular descaling of the shower head can prevent clogging and ensure consistent performance. Always follow the manufacturer’s recommendations for cleaning products to avoid damaging the finish. Proper maintenance will keep your Mira Advance ATL Thermostatic Shower functioning smoothly and prolong its lifespan.
Checking and Replacing Filters
Regularly checking and replacing filters in your Mira Advance ATL Thermostatic Shower ensures optimal performance and water quality. Locate the filter, typically found at the inlet of the mixer or shower head. Turn off the water supply before removing the filter for inspection. If you notice debris, scale, or sediment, clean or replace the filter as needed. Use a soft brush to remove any buildup and rinse thoroughly. If the filter is damaged or excessively worn, install a new one to maintain water flow and temperature regulation. Refer to the manufacturer’s guidelines for recommended replacement intervals. Proper filter maintenance prevents clogging and ensures a consistent, enjoyable showering experience while protecting the system from damage. Always use genuine or compatible replacement parts for reliability.
Inspecting for Leaks
Regularly inspecting your Mira Advance ATL Thermostatic Shower for leaks is crucial to ensure long-term performance and prevent water damage. Begin by turning off the water supply at the mains. Visually inspect all connections, pipes, and components for signs of moisture, droplets, or water stains. Pay particular attention to joints, seals, and the mixer unit. If you detect a leak, tighten any loose connections or replace worn-out seals immediately. For subtle leaks, dampen a cloth and press it against suspected areas to identify water seepage. Addressing leaks promptly prevents further damage and ensures efficient operation. Always use genuine replacement parts for reliability. Regular inspections help maintain your shower system’s integrity and extend its lifespan.
Draining the System for Maintenance
Draining the Mira Advance ATL Thermostatic Shower system is essential for routine maintenance and servicing. Start by turning off both the water and electrical supplies at the mains to ensure safety. Open the showerhead to relieve any remaining water pressure. Locate the drain valves, typically found near the bottom of the mixer unit, and turn them counterclockwise to allow water to drain completely. Use a bucket or suitable container to collect the water. Once drained, inspect internal components for mineral buildup or debris, and clean as needed. After completing maintenance tasks, slowly turn the water supply back on and check for leaks before restoring power. Regular draining helps maintain optimal performance and prevents issues related to stagnant water. Always follow safety guidelines when performing maintenance procedures.
Troubleshooting Common Issues
Troubleshooting helps identify and resolve common problems like temperature fluctuations or low water pressure. Refer to the guide for detailed solutions to ensure safety and optimal performance.
Identifying Common Problems
Common issues with the Mira Advance ATL Thermostatic Shower include temperature fluctuations, low water pressure, and electrical malfunctions. Check for leaks, faulty connections, or blockages in the system. Ensure the thermostatic mixer is functioning correctly and that water supply pressures are within recommended levels. If the shower head or hose is clogged, clean or replace them as needed. Electrical issues may require resetting the system or consulting a professional. Always refer to the user guide for specific troubleshooting steps and safety precautions to avoid further complications. Regular maintenance can help prevent many of these issues, ensuring optimal performance and longevity of the system.
Resolving Temperature Fluctuations
To address temperature fluctuations in the Mira Advance ATL Thermostatic Shower, first ensure the temperature setting is correct and stable. Check for any blockages in the water supply or mixer, as these can disrupt flow and temperature regulation. Verify that the thermostatic mixer is functioning properly and not overridden by the system. If issues persist, clean or replace the filters and ensure all connections are secure. Refer to the user guide for specific reset or calibration procedures. Always maintain the recommended water pressure levels to prevent sudden temperature changes. If the problem continues, consult a professional or contact customer support for assistance. Regular maintenance and inspections can help prevent such fluctuations and ensure consistent performance.
Fixing Low Water Pressure
Low water pressure in your Mira Advance ATL Thermostatic Shower can be addressed by checking the water supply lines for kinks, blockages, or leaks. Ensure all shut-off valves are fully open and that the shower head and hose are free from mineral buildup or debris. Descale the shower head regularly, especially in areas with hard water, to maintain optimal flow. Verify that the thermostatic mixer is not restricting water flow unnecessarily. If issues persist, check the home’s water pressure system or consult a plumber to assess and resolve any underlying problems. Always refer to the user guide for specific maintenance recommendations to restore proper water pressure and ensure a satisfying shower experience.
Addressing Electrical Issues
If you encounter electrical issues with your Mira Advance ATL Thermostatic Shower, ensure the mains power supply is switched off before investigating. Check all connections for loose wires or damage. Verify that the circuit breaker or fuse has not tripped or blown. If the shower’s control panel does not power on, inspect the electrical wiring for any signs of wear or corrosion. Consult a licensed electrician if the problem persists, as improper electrical connections can lead to safety hazards. Always follow the user guide’s instructions and safety precautions when addressing electrical concerns. Ensure the system is installed and maintained according to the provided guidelines to avoid potential risks and ensure reliable operation. Regular inspections can help prevent electrical issues from arising.
Safety Precautions and Warnings
Always adhere to the safety guidelines in this guide. Check water temperature before use and avoid restricting water flow. Ensure proper installation to prevent scalding risks and electrical hazards.
General Safety Guidelines
Always read this guide thoroughly before installing or using the Mira Advance ATL Thermostatic Shower. Follow all warnings, cautions, and instructions provided. Ensure the shower is installed by a qualified professional to prevent risks of scalding or electrical hazards. Never restrict water flow, as this can cause temperature fluctuations. Check water temperature before use, especially for children or vulnerable individuals. Keep the guide at the installation address for future reference. Regular maintenance is essential to ensure safe and optimal performance. By adhering to these guidelines, you can enjoy a safe and enjoyable showering experience with your Mira Advance ATL Thermostatic Shower.
Important Warnings for Safe Operation
To ensure safe operation of the Mira Advance ATL Thermostatic Shower, follow these critical warnings: Never install or use the shower without adhering to the instructions provided. The shower can deliver scalding temperatures if not installed or maintained correctly. Always ensure the system is installed by a qualified professional. Do not restrict water flow, as this may cause unexpected temperature changes. Regularly check the temperature before use, especially for children or vulnerable individuals. Avoid using the shower if the system is frozen, as this can cause damage or safety risks. Never use the shower as a drain for non-shower water. Keep this guide accessible for future reference. Failure to comply with these warnings may result in injury or system damage.
Preventing Scalding Risks
Preventing scalding is crucial for safe operation. Always check water temperature before entering the shower, especially for children and the elderly. The thermostatic mixer maintains a consistent temperature, but sudden changes in water supply can affect this. Ensure the shower is installed with a thermostatic mixing valve to regulate water temperature. Regularly inspect and maintain the temperature control mechanism to prevent malfunctions. Never leave children unattended while using the shower. If the system is not functioning correctly, discontinue use until repairs are made. Be aware of water pressure changes, as they can impact temperature consistency. Keep the user guide handy for reference and ensure all users understand how to adjust settings safely to avoid scalding risks.
Thank you for following the Mira Advance ATL Thermostatic User Guide. Proper installation, maintenance, and operation ensure safe and enjoyable use. Keep this guide for future reference.
Final Tips for Optimal Performance
For the best experience with your Mira Advance ATL Thermostatic Shower, ensure all installations are done by a qualified professional. Regularly clean the shower head to maintain water flow and check filters for blockages. Adjust the temperature setting to your comfort level, ensuring it’s suitable for all users. Monitor the flow rate to optimize water efficiency without compromising performance. Inspect the system periodically for any signs of leaks or wear. Always store this user guide in an accessible location for future reference. By following these tips, you’ll enjoy a safe, efficient, and satisfying showering experience with your Mira Advance ATL Thermostatic Shower.
Storing the User Guide for Future Reference
After completing the installation and familiarizing yourself with your Mira Advance ATL Thermostatic Shower, store this user guide in a safe and accessible location. This ensures that you can refer to it whenever needed for maintenance, troubleshooting, or future repairs. Keep it away from moisture to prevent damage, and consider digitizing it for backup. Sharing the guide with other users or service technicians can also be helpful. Proper storage of this guide will help maintain your shower system’s longevity and performance, ensuring you always have the necessary information at hand. This simple step can save time and prevent potential issues down the line.
Leave a Reply
You must be logged in to post a comment.